It seems like the debate of DX vs FX for wildlife and sports photography is a never ending one. DX shooters argue that they get more reach, stating that DX is like a “built-in 1.5x teleconverter”, or that DX setups are lighter due to smaller lenses and less expensive, or that DX chops off the corners of lenses, thus reducing vignetting and other optical issues. On the opposite side of the fence, FX shooters argue that they get better image quality at pixel level, better viewfinder, less diffraction issues, better AF performance in low-light, etc. Seems like we have two camps, each defending their own side for various reasons. Having spent a number of years shooting both DX and FX starting from the first generation Nikon FX cameras and every single DX camera manufactured by Nikon to date, and having talked to a number of other photographers that shoot for a living, I came to a conclusion that there are some myths surrounding the DX format that need to be debunked. In this article, I will provide my personal insight to this topic and explain why I believe that FX is always better for photographing sports and wildlife. This article evolved as a result of recent discussions of the subject with some of our readers.
1) The Myth of the DX Built-in 1.5x Teleconverter
A lot of people seem to be very confused about the effect of a crop sensor on the focal length of a lens. Stating that a crop sensor increases the focal length of the lens or acts as a teleconverter is completely wrong, since focal length is an optical attribute of a lens and has nothing to do with the camera. I talked about this in detail in my “Equivalent Focal Length” article that I published a while ago. Simply put, a DX sensor can never change the optical parameters of a lens, so if you are shooting with a 300mm lens, it stays as a 300mm lens no matter what camera you mount it on. The confusion of “equivalent focal length” comes from manufacturers that initially wanted to make people understand that the field of view on a cropped sensor camera is tighter than 35mm, because the image corners get chopped off. The word “equivalent” is only relative to 35mm film. So you cannot say that your 300mm lens becomes a 450mm lens on a DX body. It does not and never will. All you are doing, is you are taking an image from a 300mm lens, cropping it in the center area and magnifying that center with increased resolution.2) DX Pixel Size and Resolution
The only reason why some people thought that DX provided longer reach, was because DX sensors historically had similar resolution as FX. For example, both Nikon D300 (DX) and D700 (FX) have about the same resolution – 12 MP. So despite having sensors of completely different sizes, the two cameras produce images of similar size / resolution. Ultimately, this means that the D300 can resolve more detail from the center of the lens (which is typically the sharpest on any lens) and thus magnifies the subject more, which led people to believe that DX was better than FX to get closer to subjects. One aspect that was rarely talked about, however, was the fact that the D300 has a lot more noise at low ISO levels than the D700 due to smaller pixel size. So despite having this magnification advantage, photographers had to constantly deal with cleaning up apparent noise even at low ISO levels. I personally had to constantly down-sample images and clean them up via noise-reduction software to get rid of the artifacts visible at anything above ISO 800 (and noise was visible even at base ISO!). So at the end of the day, taking a DX image and down-sampling it aggressively, versus simply cropping an FX image produced somewhat similar results, with a slight advantage on DX that resulted in more detailed shots, thanks to the down-sampling process.
But these advantages pretty much went away with the D800. The Nikon D800 has a 36 MP sensor, which has the same pixel size as the Nikon D7000. In DX mode, the camera resolution is reduced to 15.4 MP, which is pretty close to the native resolution of 16.2 MP on the D7000. What this means, is that the Nikon D800 is capable of producing images of about the same detail as the Nikon D7000 at pixel level. Thus, the Nikon D800 can be thought of as a two-in-one camera – it can be both a D800 and a D7000 at the same time. I remember when the D800 came out, many DX users that wanted to move up to FX were extremely unhappy with it, because of its slow fps rate and small buffer. What they did not realize, was that the D800 actually produces images with less noise at all ISO levels compared to the D300/D300s in DX mode and has a larger buffer in comparison. Here is the buffer capacity information that I grabbed from Nikon’s website:
Nikon D300s Buffer (NEF, Lossless Compressed, 12-bit): 18
Nikon D800 Buffer (NEF, Lossless Compressed, 12-bit): 38
Yup, the Nikon D800 can accommodate more than twice the number of images in the buffer in DX mode compared to the D300s. Now there is a difference in speed – the D300s is capable of shooting 7 fps compared to 5 fps on the D800 in DX mode, so the D300s is certainly faster. But for those that don’t particularly care for 2 fps speed advantage, the D800 sounds very appealing. It is not like we are talking about 5 fps vs 10 fps. Plus, with the added battery grip and a different power source, you can push the D800 to 6 fps in DX mode, which is good enough for most situations.
So let’s get back to increased magnification advantage of a DX sensor. The current Nikon D7100 has 24 MP of resolution, which, if we convert to full-frame would result in a 56 MP camera. That’s a lot of pixels, a whole lot more than D800′s 36 MP. The question becomes, is the glass you attach to the D7100 going to be capable of resolving that much detail? Even if it does, what happens when you attach a teleconverter on top of that? Thus, the advantage of greater amount of detail on DX sensors is arguable. At pixel level, DX cameras are more demanding on optics, which is not always good, especially when using teleconverters. As I have pointed out in my “image degradation with Nikon teleconverters” article, the Nikon TC-17E II and TC-20E III eat up quite a bit of resolution. At what point will the added resolution make no difference due to lens + TC combo not being able to provide enough details for such a high-end sensor? Nikon knows that they are pushing the limits, I suspect that it is one of the reasons why they are getting rid of that anti-aliasing filter now. If a Nikon D400 ever comes out, most likely it won’t sport an AA filter either.
Let me give you an example of what I mean here. Take the Nikon 200-400mm f/4G lens, for instance. While it does a great job with the TC-14E II, it just loses too much resolution when either the TC-17E II or the TC-20E III are mounted on it. It gets to the point where you start evaluating if it is better to just use the lens with the TC-14E II and crop, or use the TC-17E II / TC-20E III and down-sample. In my experience, due to the fact that TCs affect AF accuracy and speed, you are better off with the former than the latter, especially for photographing anything that moves. The same logic can be applied to high-resolution sensors. At what point does DX’s added megapixel advantage start wearing off when compared to FX?
In summary, the “reach” advantage of DX sensors is quite debatable. With the added noise, more visible effects of camera shake due to high resolution and other issues, I would not say that DX has a lot to offer when compared to FX here.
3) The Impact of Diffraction
Smaller pixels magnify a lot of things and one of them is diffraction. DX sensors are typically impacted by diffraction at f/8 and smaller. While you might not notice diffraction issues at f/11 on the D300, you will surely notice them on the D7100. You will have to look closely, but the difference is there. If Nikon released a 56 MP full-frame camera with the same pixel pitch as the D7100, diffraction would be visible at about the same aperture on both. That’s why the Nikon D800 and the Nikon D7000 have about the same diffraction limits. Hence, since DX cameras typically have higher resolution than FX cameras, they are diffraction limited at larger apertures. Mount a TC-20E III and stop down to f/11 or smaller on the D7100 and you will quickly see the effect of diffraction.4) Depth of Field Impact
Another issue that seems to be the topic of misunderstanding is how the sensor size impacts depth of field. There is a general consensus among photography experts that DX sensors increase depth of field (with certain conditions discussed below), but a lot of people do not understand what this actually means. The fact is, depth of field is only increased on DX sensors when the framing or the “angle of view” between DX and FX is exactly the same. For example, if you are shooting a bird with two Nikon 500mm lenses from the same distance at f/4, one mounted on the D7000 (DX) and the other on the D800 (FX), depth of field on DX will only be larger when framing is exactly the same. Obviously, to get both cameras to frame the bird identically, you would have to physically move closer to the bird with the D800. Since the camera to subject distance is decreased while all other variables are staying the same, depth of field is also decreased. Now here is another fun example to add to this: since the DX mode on the D800 yields the same field of view as the D7000, you could simply set the D800 to DX mode and you would end up with very similar framing and exactly the same depth of field on both cameras. If you are confused about this, read this excellent article on the subject, which explains all this in detail.
5) The Myth of Lighter Lenses
One thing I have heard a lot from the DX crowd, is that DX lenses are lighter and cheaper. While that statement certainly holds true for wide and standard lenses, it is absolutely not true for telephoto and super telephoto lenses. DX shooters have no super telephoto DX lenses to choose from – Nikon completely ignored that segment. The longest focal length DX lenses are the Nikon 18-300mm and Nikon 55-300mm, both of which are a joke for serious sports and wildlife photography. This leaves DX users with the same heavy pro lenses used on FX. Now some will say that a DX camera allows one to use a budget option such as Nikon 300mm f/4 + 1.4x TC to get to 600mm focal length and the only way to get to 600mm on a full-frame body is to use much more expensive choices such as 300mm f/2.8 + TC-20E III. First, this is only true for low resolution FX bodies, as discussed above (the D800, for instance, would yield a similar result in DX mode as the D7000). Second, this again becomes the question of magnification versus crop and ISO performance. Lastly, you cannot just compare 300mm f/4 to 300mm f/2.8 – both lenses are built differently and provide different options.6) Crop Advantage
Sure, DX sensor crops out the worst part of the lens, which diminishes vignetting and other optical problems, but who cares about that on super telephoto lenses? Take a look at MTF data for most super telephoto lenses – they all look excellent in the corners. In addition, I do not know of any wildlife / sports photographer that cares about corner performance. Most sports / wildlife shots have the subject in the center or slightly off-center. Nobody will take a shot of a bird in the extreme corners of the frame. So the crop part of the sensor is pretty much irrelevant – DX has no advantage here whatsoever.
7) Viewfinder Size
FX cameras have much bigger viewfinders than DX. This makes it a whole lot easier to see if the bird you are photographing is indeed in perfect focus. With DX, you have to rely on AF a lot, because you just can’t see that well through the viewfinder. If you have not seen how huge the difference is, put a DX and an FX camera side by side and check it out. You will be amazed to see how much brighter and larger an FX viewfinder is in comparison.8) MultiCAM 3500DX vs 3500FX
In my experience, the MultiCAM 3500FX works better in terms of AF accuracy than MultiCAM 3500DX. While a lot of people argue that both AF systems are the same, having shot with both for a long time (I used to own a Nikon D300) I disagree. In my experience, MultiCAM 3500FX is better than MultiCAM 3500DX. I think it has to do with the fact that FX cameras have a much larger mirror and hence the AF system might receive more light from the lens. Try shooting birds in low light with both the D300 and the D700 (or with the D7100 and D800), and you will quickly realize which camera will end up with better AF accuracy. Hence, my conclusion is that AF on FX bodies is slightly better than on DX. There might also be physical size differences between 3500FX and 3500DX – if the AF modules for both DX and FX were exactly the same, Nikon would not have named them differently. I noticed the same thing with the D600 and the D7000. The former has the same AF module as the D7000, albeit modified for FX. I did some birding with the D600 and the D7000 and I came back with more keepers on the D600 than I did with the D7000. Perhaps I am biased towards FX, but that’s my “real world” experience.Those who try out FX for wildlife almost never come back to DX. Some people shoot with both, but if you ask those that do, they will tell you that they prefer their D3 to their D300/D300s. FX makes a difference, whether it has to do with image quality, AF accuracy or other reasons.
9) The Original Intent of DX
DX was never designed as a “feature” for getting closer to action, as I have numerously pointed out in my articles. If digital sensors did not cost so much money in the past, manufacturers would not have made DSLRs with small sensors. APS-C was designed for cost reasons alone, to make DX cameras cheaper, not to make DX cameras lighter or better for reach. Most of the advantages of DX cameras are simple marketing tricks.
10) DX Cost Advantage
The only real advantage of DX over FX today, is cost. But with such offers as the D600 and the price of FX sensors continuously coming down, that huge cost difference is not there anymore. If in the past you had to spend 2-3x+ to move up to FX, today that difference is much smaller. Manufacturers are now making feature differences between cameras and intentionally removing functionality from FX cameras like D600, so that their high-end DX lines are not threatened. Can you imagine what a D600 with a MultiCAM 3500FX + 1/8000 shutter + big buffer would do to D7100/D300s sales? With recent promotions, the D600 dropped to as low as $1800 and the price is going to continue to drop. That’s why I believe that DX has no future. Nikon might try to push a D400 later this year, but it probably will be the last high-end DX camera we see from Nikon. As soon as the D600 gets a 51 point AF and a bigger buffer, it will be the end of the high-end DX.
11) Summary
In summary, FX is better than DX for shooting wildlife and sports for the above reasons. The only reason why anyone should be shooting with DX is lower cost. If you can afford high-end FX, there is very little reason to stick with DX. Don’t listen to photographers that say that their D300s or D7100 is better than the D4, because it gives them better “reach”. I would pick a used D700 over a brand new D7100 any time for sports and wildlife photography…At the end of the day, however, keep something else in mind – any camera, whether DX or FX is capable of producing excellent results. It is not the gear, it is the guy behind the camera :)
The post DX or FX for Sports and Wildlife Photography appeared first on Photography Life.
No comments:
Post a Comment